eTattle (All Sizes)


This simple conversion of the Tattle original to an eTattle allows for instant notification of any release. All Tattle's are shipped with the mounting holes pre-drilled for the future installation of the eTattle conversion kit. You will need to have a controls system able to accommodate one input per each eTattle.


The eTattle conversion kit is comprised of:

  • 0.5A –200v N.O. dry contact held closed by a magnet in its normal state
  • 3-wire D.I.N. plug assembly*
  • Mounting screws
  • Magnetic arm
  • Easy to install and maintain*


*Add dielectric grease to plug/switch for locations prone to moisture.

This conversion kit (Depending on how you wire it into your controls system) can send an instant notification of a release via text or email along with some proactive countermeasures. Example, it could shut off liquid feeds on a low side release or start cycling off compressors if it is a high side release.


Download Installation and Service Information


eTattle Wiring Diagram:


eTattle Install:


dimensions & specifications





†  Values determined with modeling software and verified with bench tests.

We maintain a large inventory of the most commonly used replacement parts and they are readily available whenever you need them. If you need to purchase any parts, please contact us via email or contact form.

All CCA Technologies’ (CCA Tech) products are warranted against defects in workmanship and materials for a period of one year from date of shipment from originating factory. This warranty is in force only when products are properly installed, field assembled, maintained, and operated in use and serviced as specifically stated in the CCA Tech Bulletins for normal refrigeration applications, unless otherwise approved in writing by CCA Tech. Defective products, or parts thereof, returned to the factory with transportation charges prepaid and found to be defective by factory inspection will be replaced or repaired at CCA Tech, free of charge F.O.B. factory. Warranty does not cover products that have been altered, or repaired in the field; damaged in transit, accidents, misuse, or abuse. Products disabled by dirt, paint, or other foreign substances will not be considered defective. The express warranty above constitutes the only warranty of CCA Tech products, and is in lieu of all other warranties, expressed or implied, written or oral, including any warranty of merchantability or warranty of fitness for a particular purpose and in no event is CCA Tech responsible for any consequential damages of any nature whatsoever. No employee, agent, dealer or other person is authorized to give any warranties on behalf of CCA Tech or to assume for CCA Tech any other liability in connection with any of its products.